Y-cam Cube Manuel d'utilisateur télécharger pdf (Page 48)

Page 48

6.6.7 Port forwarding if UPNP is not available

If you are not using UPNP or UPNP is disabled on your router, you will need to open a port on your router so that you

can access your Y-cam from the internet.

If you are unsure if UPNP is working on your camera, visit your Y-cam Settings System page. Under UPNP port

forwarding it will labelled as “Success”, “Failed” or “Disabled”.

Firewall security features built into some routers may prevent the camera’s UPNP from configuring your router. Your

router connects to the Internet over a series of “ports” and sometimes the default ports used by the Y-cam are blocked

from access over the Internet, therefore, these ports need to be made accessible.

This is achieved using the Port Forwarding function on your router. The ports used by the camera must be opened

through the router for remote access to your Y-cam. Check your router’s user manual for specific instructions on how to

open and route ports on you router or you can find instructions for how to do this for your specific router on the

following website:

http://www.portforward.com/

1. Visit www.portforward.com

2. Search your router model number

3. Scroll down this list of products to Y.

4. Select Y-cam IP Wireless camera.

Click Apply to confirm your setting.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 87 88

Pas de commentaire

Y-cam Cube Manuel d'utilisateur Page 48