Y-cam Cube Manuel d'utilisateur télécharger pdf (Page 46)

Page 46

6.6.5 Viewing your camera externally using DDNS

If you have setup your DDNS account, and UPNP is enabled, you should be able to view your camera externally.

To get your cameras external address, visit the Y-cam Settings System page, and it will be listed under “Internet URL”.

Open any internet browser on your computer, and type this Internet URL. After a few moments, your Camera

Homepage should be displayed. You can then login to view your camera or change your settings as normal.

Please note: Some ISPs disable the ability to view your camera via an external address from the

same network as your camera. This will give you a Page Not Found error in your web browser.

If this is the case, try to connect to your camera via your DDNS address from a mobile phone, or

from another internet connection.

The external address using DDNS is made up of two parts – your DDNS account address and the port you opened via

UPnP or manually.

For example: DDNS Host name account: http://yourname.dtdns.com Port: 8150

So with the above information, your camera would have the address of: http://yourname.dtdns.com:8150

Open any internet browser on your computer, and type your own DDNS account name, followed by :8150 (that’s a

colon, followed by 8150). After a few moments, your Camera Homepage should be displayed. You can then login to

view your camera or change your settings as normal.

To confirm your own external camera address, stay within the Settings menu, and click on “System” at the top right of

the screen. This will list various settings of your camera. Under UPNP Port Forwarding, it should list your cameras

hostname and port.

Please note: If you have only just registered your DDNS account and/or Host Name, it may take

a while until your account is activated and registered on the internet.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 87 88

Pas de commentaire

Y-cam Cube Manuel d'utilisateur Page 46