Y-cam Camera Manuel d'utilisateur télécharger pdf (Page 49)

Page 49

6.7 Alarm Menu

The Alarm menu is located on the right of the Settings screen. When you click on the word “Alarm”, a sub-menu of

alarm setup options will be displayed.

6.7.1 Digital I/O Setup

Applies to products: YCBL03, YCBLB3, YCEB03, YCBLHD5

This menu refers to the Digital I/O found on the Y-cam Breakout Box.

The 4-pin I/O terminal connector provides the interface to: 1 digital input, 1 digital output, auxiliary power and GND

(ground)

Some versions of the Y-cam Bullet may be supplied with the attached Digital I/O connector:

Function

Description

GND

Common Ground

Digital Input

Connect to GND to activate, or deactivate by software setting.

Digital Output

With a maximum load of 1A and maximum voltage of 60VDC, this output uses an open-

collector NPN Darlington transistor with the emitter connected to the GND pin. If used

with an external relay a diode must be connected in parallel with the load for protection

against voltage transients.

Auxiliary DC Power

12V DC max. Electrically connected in parallel with the connector for the PS-L power

adapter, this pin provides an auxiliary connector for power to the unit. This pin can also

be used to power auxiliary equipment, max 40mA.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 87 88

Pas de commentaire

Y-cam Camera Manuel d'utilisateur Page 49